How To: Setup Stock Item EPOS Quick Sales Descriptions


Setup a Stock Item Quick Sell Description

  1. Open a Stock screen (show me how).
  2. Locate and open the stock item.
  3. Go to the [ Stock | Detail | Telesales/Internet | Primary ] tab.
  4. Press Alt+E or click the green triangle icon is the buttonbar's EDIT button to enter edit mode.
  5. In the EPOS Desc field below the Comment section in the bottom left, enter the EPOS Quick Sales description.
    Note: remember to keep button description short (approximately 8 characters including spaces) otherwise it may fall off the end of the button.
  6. Press Ctrl+S or click the disk icon is the button bar's SAVE button to save.

Applying a Stock Item to a Quick Sell button

Make sure that the stock quick sell descriptions have been added, see above.

  1. Open the EPOS screen screen (show me how).
  2. Login to EPOS.
  3. Click the EPOS manage button button until the eight purple buttons appear.
  4. Right Click over a blank Purple EPOS button button.
  5. Select Assign Stock Item from the context menu.
  6. Find the desired stock item then double click to apply it to the button.
    Note: if a stock item has been applied to a button but a quick sell description was not setup then the button will remain blank. To make sure the button is clear please follow the next procedure.

Clearing a Stock Item from a Quick Sell button

  1. Open the EPOS screen screen (show me how).
  2. Login to EPOS.
  3. Click the EPOS manage button button until the eight purple buttons appear.
  4. Right Click over a blank Purple EPOS button button.
  5. Select Clear Stock Item from the context menu.
  6. Click Yes to acknowledge the removal of the stock item from the button.

See Also


Did you find this article helpful?