How To: Add an Image for a Stock Item

Images can be added that are on a location on your server, see Image Locations and externally located images can be added using their URL.

Adding an Image Located on your server

  1. Open a Stock screen (show me how).
  2. Load the required stock item.
  3. Open the [ Stock | Detail | Telesales / Internet | Primary ] tab.
  4. Press Alt+E or click the green triangle icon is the buttonbar's EDIT button to enter edit mode.
  5. Click BtnNewItem.jpg in the Image section.
  6. Locate the image.
  7. Click 'Open' button on the look dialog once the desired item has been found.
  8. Add Name, Description and Image Type as required.
  9. Press Ctrl+S or click the disk icon is the button bar's SAVE button to save.

The image will be displayed in the image panel below.

Adding an External Image

  1. Open a Stock screen (show me how).
  2. Load the required stock item.
  3. Open the [ Stock | Detail | Telesales / Internet | Primary ] tab.
  4. Press Alt+E or click the green triangle icon is the buttonbar's EDIT button to enter edit mode.
  5. Click the the world icon button to add an image URL button in the Image section.
  6. In the Add Image (URL) popup enter the URL.
  7. Click on OK to close the popup.
  8. Add Name, Description and Image Type as required.
  9. Press Ctrl+S or click the disk icon is the button bar's SAVE button to save.

To load the image:

  1. Focus on the image in the Images grid.
  2. Click on the opens the image in a web browser button at the bottom of the image panel, the image will load in your browser.

Please note, Khaos Control does not support CMYK JPEGs.

See Also


Did you find this article helpful?