Basic Reports
Table Of Contents
Khaos Control can use either Standard Reports or Basic Reports for selected documents. Basic Reports give administrators a range of configuration options and access to the Report Builder Designer, allowing selected report layouts and settings to be changed without requiring development for every adjustment.Warning: Before making any changes to a Basic Report template, take a backup of the existing template. This is particularly important when using Report Builder to change the report design. BasicReports Picking Ticket Report and How To: Add the Dimensions to Basic Report Documents both reinforce this recommendation.
Khaos Control can use either Standard Reports or Basic Reports for selected documents. Basic Reports give administrators a range of configuration options and access to the Report Builder Designer, allowing selected report layouts and settings to be changed without requiring development for every adjustment.
Warning: Before making any changes to a Basic Report template, take a backup of the existing template. This is particularly important when using Report Builder to change the report design. BasicReports Picking Ticket Report and How To: Add the Dimensions to Basic Report Documents both reinforce this recommendation.
Standard Reports and Basic Reports
Khaos Control supports two approaches to report layouts:- Standard Reports offer extensive customisation, but changes require development.
- Basic Reports offer a more limited range of customisation but include access to the Report Builder Designer for supported reports.
With Basic Reports, administrators can change the layout of supported reports and configure options such as whether a logo is displayed or how particular information appears.Note: Khaos Control's Basic Reports and Custom Reports use the Report Design area of Report Builder rather than the entire ReportBuilder utility. Some Report Builder features are therefore unavailable, and the fields you can use depend on the report template you are editing.
Khaos Control supports two approaches to report layouts:
- Standard Reports offer extensive customisation, but changes require development.
- Basic Reports offer a more limited range of customisation but include access to the Report Builder Designer for supported reports.
With Basic Reports, administrators can change the layout of supported reports and configure options such as whether a logo is displayed or how particular information appears.
Note: Khaos Control's Basic Reports and Custom Reports use the Report Design area of Report Builder rather than the entire ReportBuilder utility. Some Report Builder features are therefore unavailable, and the fields you can use depend on the report template you are editing.
Basic Reports Interface
Opening Basic Reports Setup
Important: Report Builder Designer is an Advanced User feature.
Open System Operations - Basic Reports Setup to configure Basic Reports.
You need Admin permission to access Basic Reports Setup, and Basic Reports functionality must be switched on. The setup screen contains a Reports List and a Details area for configuring the selected report. System Operations - Basic Reports Setup
From the Reports List, double-click the report you want to configure to open its settings.
Important: Report Builder Designer is an Advanced User feature.
Open System Operations - Basic Reports Setup to configure Basic Reports.
You need Admin permission to access Basic Reports Setup, and Basic Reports functionality must be switched on. The setup screen contains a Reports List and a Details area for configuring the selected report. System Operations - Basic Reports Setup
From the Reports List, double-click the report you want to configure to open its settings.
Configurable Reports
When Khaos Control is set to use Basic Reports, you can configure the following reports through the Basic Reports interface:- Customs Invoice
- Delivery Notes
- Sales Invoice series, including the layout used for Credit Notes and Sales Quotations
- Combined Picking Sheets
- Picking Ticket / Despatch Note
- Purchase Order
- Sales Order Acknowledgement
The settings available depend on the report selected. For example, supported report settings can control logos, addresses, shading, stock information, currencies and other report-specific information. System Operations - Basic Reports Setup Note: If the customisation you need is beyond the options available through Basic Reports, further report development may be required.
If you print a report that has not been configured through Basic Reports, Khaos Control uses its unmodified report template. The unmodified template is also used when branding is enabled but the brand on the Sales Order does not have an associated Basic Report.
When Khaos Control is set to use Basic Reports, you can configure the following reports through the Basic Reports interface:
- Customs Invoice
- Delivery Notes
- Sales Invoice series, including the layout used for Credit Notes and Sales Quotations
- Combined Picking Sheets
- Picking Ticket / Despatch Note
- Purchase Order
- Sales Order Acknowledgement
The settings available depend on the report selected. For example, supported report settings can control logos, addresses, shading, stock information, currencies and other report-specific information. System Operations - Basic Reports Setup
Note: If the customisation you need is beyond the options available through Basic Reports, further report development may be required.
If you print a report that has not been configured through Basic Reports, Khaos Control uses its unmodified report template. The unmodified template is also used when branding is enabled but the brand on the Sales Order does not have an associated Basic Report.
Basic Reports Action Buttons
The action buttons in Basic Reports Setup provide additional configuration options.
The action buttons in Basic Reports Setup provide additional configuration options.
Stock Related
Set the default barcode type used for a price list.For more information, see System Data Stock: Barcode Type.
Set the default barcode type used for a price list.
For more information, see System Data Stock: Barcode Type.
Conditional
Set conditions against report components so that they only appear when particular criteria are met.For more information, see Basic Reports - Setting Conditions.Conditions can also be used with report layers to control when particular content appears. For example, Khaos Control documentation describes using conditions to show a stationery design only when a report is being sent by email. How To: Include Pre-Printed Stationery Paper in Reports for Emails
Set conditions against report components so that they only appear when particular criteria are met.
For more information, see Basic Reports - Setting Conditions.
Conditions can also be used with report layers to control when particular content appears. For example, Khaos Control documentation describes using conditions to show a stationery design only when a report is being sent by email. How To: Include Pre-Printed Stationery Paper in Reports for Emails
Rotate
Rotate memo boxes where required, for example when producing a vertical address label.
Rotate memo boxes where required, for example when producing a vertical address label.
Stock UDAs
Include Stock UDA values in supported reports.
Include Stock UDA values in supported reports.
Addresses
Specify the type of address that should appear on the report.The Address Type setup supports Company Address, Invoice Address and Delivery Address options. Basic Reports Setup - Address Type
Specify the type of address that should appear on the report.
The Address Type setup supports Company Address, Invoice Address and Delivery Address options. Basic Reports Setup - Address Type
Sorting (Order)
Define the order in which information appears on supported reports.Note: Sort Order is only available on supported reports when Allow Cust Sorting (Order) is selected.
Define the order in which information appears on supported reports.
Note: Sort Order is only available on supported reports when Allow Cust Sorting (Order) is selected.
Copy From
Copy the complete report setup from one brand to another branded report.
Copy the complete report setup from one brand to another branded report.
Design
Open Report Designer to make changes to the report's layout, including adding or removing available fields and configuring address templates.Warning: Report Designer is an advanced feature. Always back up the report template before editing it.
Some report templates have a specific set of data fields available to Report Builder, so you cannot assume that every Khaos Control field will be available in every report. How To: Add the Dimensions to Basic Report Documents demonstrates that fields are selected from the data pipelines made available to the report template.
Open Report Designer to make changes to the report's layout, including adding or removing available fields and configuring address templates.
Warning: Report Designer is an advanced feature. Always back up the report template before editing it.
Some report templates have a specific set of data fields available to Report Builder, so you cannot assume that every Khaos Control field will be available in every report. How To: Add the Dimensions to Basic Report Documents demonstrates that fields are selected from the data pipelines made available to the report template.
Report Template Path
Enter the location of the report template in Report Template Path.The report template must be stored in a central location.
Enter the location of the report template in Report Template Path.
The report template must be stored in a central location.
Reports Not Accessed Through Basic Reports
Even when Khaos Control is configured to use Basic Reports, some reports continue to use Standard Reports. Changes to these reports need to be treated as custom development.These include:
Even when Khaos Control is configured to use Basic Reports, some reports continue to use Standard Reports. Changes to these reports need to be treated as custom development.
These include:
Basic Reports Configuration Notes
The following articles provide more detailed guidance for configuring Basic Reports.
The following articles provide more detailed guidance for configuring Basic Reports.
Address Memo Fields
Basic Reports - Address fields explains how experienced Report Builder users can change the information contained in Basic Report address memo fields.Basic Reports commonly use separate memo fields for the Company Address, Invoice To Address and Deliver To Address. Basic Reports - Address fields
Basic Reports - Address fields explains how experienced Report Builder users can change the information contained in Basic Report address memo fields.
Basic Reports commonly use separate memo fields for the Company Address, Invoice To Address and Deliver To Address. Basic Reports - Address fields
Show Build Children
Basic Reports - Show Build Children explains how to enable Show Build Children for supported Sales Invoice, Delivery Note and Picking Ticket reports, including information for experienced Report Builder users updating existing templates.
Basic Reports - Show Build Children explains how to enable Show Build Children for supported Sales Invoice, Delivery Note and Picking Ticket reports, including information for experienced Report Builder users updating existing templates.
Printing Multiple Copies
Basic Reports - Printing Multiple Copies explains how Report Builder can be configured to automatically produce multiple copies of a report, for example an additional printed copy of a Sales Invoice for filing.
Basic Reports - Printing Multiple Copies explains how Report Builder can be configured to automatically produce multiple copies of a report, for example an additional printed copy of a Sales Invoice for filing.
Sort Order
Basic Reports Setup - Sort Order explains how to configure the Sort Order function for supported reports.
Basic Reports Setup - Sort Order explains how to configure the Sort Order function for supported reports.
Address Type
Basic Reports Setup - Address Type explains how to control the type of address used on a report.
Basic Reports Setup - Address Type explains how to control the type of address used on a report.
Available Data Fields
Basic Reports - Available Data Fields lists the database fields available for use within Basic Reports.
Basic Reports - Available Data Fields lists the database fields available for use within Basic Reports.
See Also
- System Operations - Basic Reports Setup
- Report Builder Designer
- Basic Reports - Available Data Fields