How To: Create a Supplier Return

There are two types of Supplier Returns; stock items being returned to the supplier and those items being returned for repair or replacement. When creating Supplier Returns, users must create separate returns for items being sent back for repair or replacement and those just being sent back to the supplier, for example when the stock item has been discontinued and therefore cannot be replaced.

Clicking on the the printer icon is the button bar's PRINT button on the Button Bar will create the return report which can be emailed to the supplier if setup. The report lists the Total and Unit amounts either in Gross (default) or Net; please email Development if you wish to change this.

Extended Stock Descriptions can be added to the items being returned but if using the Repaired or Replaced option the extended description does not appear on the associated purchase order.

Note: if using warehouse control please see How To: Process Supplier Returns when using Warehouse Control - 8.182.

Standard Supplier Return

Return Step 1 - Setting up the Return

  1. Open a Purchase Order screen (show me how).
  2. Open the [ Supplier | Return ] tab.
  3. Press Ctrl+N or click the New item icon is the button bar's NEW button to create a new Supplier Return.
  4. Use the filters to locate the supplier.
  5. Double-click on the supplier.
  6. Press F3 or click the NEW ITEM button has an icon that shows two sheets of paper (identified by having the top right corner folded down), arranged diagonally on the icon from top left to bottom right to add a new item.
    • Use the filters to locate the stock item(s).
    • Double click on the stock item(s).
    • Repeat until all items to be returned have been added.
  7. Press Ctrl+S or click the disk icon is the button bar's SAVE button to save the record.
  8. If the items are not being sent back to the supplier immediately, click the 'put items into the Returns Bin' button.

Return Step 2

Processing Supplier Returns when Credit Notes are Received - Partial Credit

  1. Press Alt+E or click the green triangle icon is the buttonbar's EDIT button to enter edit mode.
  2. In the To Credit column for each item that has a credit note or is being returned to the supplier, enter the quantity that is to be credited. This does not have to be the total of all the items, just the ones being returned at this time.
  3. Press Ctrl+S or click the disk icon is the button bar's SAVE button to save the return.
  4. Click on the Create partial credit note button in Supplier Returns button, this will:
    1. Remove the items from the Returns Bin and...
    2. Create a Purchase Credit Note.
  5. Confirm the message and then click OK in the popup.

Notes:

  • Once a partial credit note has been created, the remainder of the items on the supplier return must be credited using the 'Create Full Credit Note' button as detailed below.
  • Partial Credit Notes cannot be created for batch controlled items.

Processing Supplier Returns when Credit Notes are Received - Full Credit

  1. Click on the Create partial credit note button in Supplier Returns button, this will:
    1. Remove the items from the Returns Bin and...
    2. Create a Purchase Credit Note.
  2. Confirm the message and then click OK in the popup.

Return Step 3 - The Purchase Credit

The Purchase Credit will need to be posted so that it appears in the [ Supplier | Statement ] screen. There are two options for accessing the purchase credit note from the supplier return:

  1. Right-click in the Return and select Go to Purchase Credit Note:
    1. If there has just been one return processed then the Purchase Credit Note will be opened.
    2. If more than one return has been processed then the Supplier Return Credits dialog will open. Focus on the Purchase Credit Note you wish to open and then click OK.
  2. Right click in the grid and select Show Credits, focus on the Purchase Credit Note you wish to open and then click OK.


Notes:

  • It is not possible to re-generate a partial Invoice, if the previous Invoice was deleted. In this scenario, the recommended action is to delete the Supplier Return (after deleting any other linked Purchase Invoices) and create a new Supplier Return.
  • The Supplier Return can now be shown multiple times in [ Supplier Return | List ]. This is expected and is because the Supplier Return is linked to multiple Credit Notes.
  • If a supplier return is linked to multiple Credit notes and any are deleted, then it isn't possible to create any further credit notes. But rather, all of the credit notes should be deleted, so that the process can begin again.
  • Prior to creating either a full or partial credit note, the full return quantity must have been put into the returns bin.

Supplier Return for a Stock Item being Repaired or Replaced

Exchange Step 1 - Setting up the Exchange

  1. Open a Purchase Order screen (show me how).
  2. Open the [ Supplier | Return ] tab.
  3. Press Ctrl+N or click the New item icon is the button bar's NEW button to create a new Supplier Return.
  4. Use the filters to locate the supplier.
  5. Double-click on the supplier.
  6. Press F3 or click the NEW ITEM button has an icon that shows two sheets of paper (identified by having the top right corner folded down), arranged diagonally on the icon from top left to bottom right to add a new item.
    • Use the filters to locate the stock item(s).
    • Double click on the stock item(s)to be repaired to add them to the grid.
    • Repeat until all items to be returned for repair have been added.
  7. Check the Repair/Replace items(s) checkbox.
  8. Select the Repair Due Date.
  9. Press Ctrl+S or click the disk icon is the button bar's SAVE button to save the record.
  10. If the items are not being sent back to the supplier immediately, click the 'put items into the Returns Bin' button

Exchange Step 2 - Sending the Items back for repair/replacement

  1. When the items are ready to be sent back to the supplier, locate the supplier return for the items.
  2. Click on the Create partial credit note button in Supplier Returns button, this will:
    1. Remove the items from the Returns Bin and...
    2. Create a Purchase Credit Note.
  3. Confirm the message and then click OK in the popup.
  4. Click 'Ok' to close the dialog.
  5. A popup will state that 'The following POrder has been created' and will display the Purchase Order number.
  6. Click on OK.

Exchange Step 3 - Booking the Repaired/Replaced Items back into Stock

  1. When the repaired/replaced item(s) arrive back from from the supplier, the user will need to book these into Khaos Control using the normal delivery process, ensuring that the items are those from the Purchase Order that was created from the Supplier Return. The Purchase Invoice that is then created will need to be posted by checking the Post Invoice checkbox for it to also appear on the [ Supplier | Statement ].
  2. Locate the Purchase Credit created in Step 2. A Purchase Credit Note is created because a stock item has been removed from stock and sent back to the supplier. Therefore the stock numbers are down for this item for accounts purposes (stock numbers/value).
  3. Post the Purchase Credit Note so that it appears in the [ Supplier | Statement ] screen. It can then be used to pay for the replacement item.

Note: We recommend that on the [ Supplier | Statement ] screen, the Purchase Credit Note from the Supplier Return is used to pay for / offset the Purchase Invoice for the replacement items as this helps when tracking payment allocations.

See Also


Did you find this article helpful?