How To: Create a Supplier Return which has Batch Controlled Items
Table Of Contents
Use Supplier Returns to record stock that is being sent back to a supplier. This can include items being permanently returned for credit, or items being sent away for repair or replacement.
When using Warehouse Control and Warehouse Batches, you can select the relevant batch code and warehouse location for each item being returned.
Important: Warehouse Batches is not enabled by default. Email Development for more information. Additional costs apply if this option is enabled.
Types of Supplier Return
There are two types of Supplier Return:
- Standard Supplier Return: use this when stock is being returned to the supplier and will not be repaired or replaced. For example, you might return an item that has been discontinued and cannot be replaced.
- Repair or Replacement Return: use this when the supplier will repair or replace the stock and send it back to you.
Create separate Supplier Returns for standard returns and items being sent for repair or replacement.
Both return types can contain batch codes.
If you need to create a Supplier Return from a Customer Return, see How To: Create a Supplier Return from a Customer Return when using Warehouse Control.
Before you begin
A few points are worth knowing before you create the return:
- You can generate a return report and email it to the supplier if email functionality has been set up.
- The return report displays Total and Unit amounts as Gross by default. Email Development if you need the report to show Net amounts instead.
- Extended Stock Descriptions can be added to returned items. However, for a Repair or Replacement Return, the extended description will not appear on the associated Purchase Order.
Standard Supplier Return
Step 1: Create the Supplier Return
- Open a Purchase Order screen. See How To: Open a Purchase Order screen if required.
- Open the [ Supplier | Return ] tab.
- Press Ctrl+N or use the New button to create a Supplier Return.
- Use the filters to find the supplier.
- Double-click the supplier to select it.
- Press F3 or use the Add Item button.
- Add the stock you want to return:
- Use the filters to find the stock item.
- Double-click the item to add it.
- Repeat this for each item being returned.
- For a batch-controlled item, go to the red Batch Code (Ent) column on the far right of the grid:
- Press Enter.
- Double-click the batch code associated with the item being returned.
- Press Ctrl+S or use the Save button to save the Supplier Return.
Assign the warehouse locations
Once you have selected the items and their batch codes, specify where the stock is being taken from.
- Right-click the return and select Assign Warehouse Locations.
- The Select source locations for items dialog opens.
- Select an item in the upper grid.
- In the lower grid, enter the quantity against the location the stock is being taken from.
- Repeat this for each item in the upper grid.
- Click OK when you have finished.
- Use the Put Items Into the Returns Bin button on the Supplier Return to move the selected stock into the Returns Bin.
Note: The lower grid only shows locations containing the item and batch code you selected earlier.
Warehouse location considerations
- You can return stock from more than one warehouse location. Split the return quantity between the appropriate locations.
- The total quantity assigned to warehouse locations must match the quantity on the Supplier Return. If it does not, Khaos Control will not allow you to add the items to the Returns Bin.
- You cannot select stock while it is in Quarantine. Move it to another location before adding it to the Supplier Return.
- If some items have already been placed in the Returns Bin, green-select only those that still need to be added before using the Returns Bin option.
Step 2: Process the Supplier Credit
You can process the return when the supplier's credit note is received.
Khaos Control supports both partial and full credits.
Important: Before creating either a partial or full credit note, the full return quantity must have been placed in the Returns Bin.
Process a partial credit
Use a partial credit when the supplier is only crediting some of the returned stock at this stage.
- Press Alt+E or use the Edit button.
- In the To Credit column, enter the quantity being credited for each applicable item.You do not need to enter the full return quantity. Enter only the quantity being credited at this point.
- Press Ctrl+S or use the Save button.
- Use the Create Partial Credit Note button on the Supplier Return.
Khaos Control will:
- remove the relevant items from the Returns Bin; and
- create a Purchase Credit Note.
- Confirm the message.
- Click OK in the pop-up.
Process a full credit
When the supplier is crediting all applicable stock:
- Press Alt+E or use the Edit button.
- Enter the quantity being credited against each item in the To Credit column.
- Press Ctrl+S or use the Save button.
- Use the Create Full Credit Note button on the Supplier Return.
Khaos Control will:
- remove the items from the Returns Bin; and
- create a Purchase Credit Note.
- Confirm the message.
- Click OK in the pop-up.
Step 3: Process the Purchase Credit
The Purchase Credit must be posted before it appears on the [ Supplier | Statement ] screen.
There are two ways to access Purchase Credit Notes linked to a Supplier Return.
Option 1: Go to the Purchase Credit Note
- Right-click within the Supplier Return.
- Select Go to Purchase Credit Note.
What happens next depends on how many credits have been processed:
- If there is only one Purchase Credit Note, Khaos Control opens it directly.
- If there is more than one, the Supplier Return Credits dialog opens. Select the Purchase Credit Note you want and click OK.
Option 2: Show Credits
- Right-click within the grid.
- Select Show Credits.
- Select the Purchase Credit Note you want to open.
- Click OK.
Non-sterling suppliers
When you create a Supplier Return for a non-sterling supplier, Khaos Control converts the default sterling buy price into the equivalent supplier currency price.
If the stock item already has a supplier-specific price, that price is used instead.
The conversion rate is fixed when the item is added to the Supplier Return. The resulting prices are carried through to the Purchase Credit Invoice.
Important information about partial credits
- If a partial Purchase Invoice is deleted, you cannot regenerate it. Delete the Supplier Return after deleting any other linked Purchase Invoices, then create the Supplier Return again.
- A Supplier Return can appear multiple times in [ Supplier Return | List ] when it is linked to multiple Credit Notes. This is expected behaviour.
- If a Supplier Return has multiple Credit Notes and one is deleted, you cannot create further Credit Notes against that return. Delete all of the linked Credit Notes so the process can be started again.
Supplier Return for a repaired or replaced stock item
Use this process when stock is being returned to a supplier for repair or replacement.
Keep these items on a separate Supplier Return from stock being returned permanently.
Step 1: Create the repair or replacement return
- Open a Supplier Return screen. See How To: Open a Supplier Return screen if required.
- Open the [ Supplier | Return ] tab.
- Press Ctrl+N or use the New button.
- Use the filters to find the supplier.
- Double-click the supplier.
- Press F3 or use the Add Item button.
- Find the stock item being sent for repair or replacement and double-click it to add it to the grid.
- Repeat this until you have added all the required items.
- Select the Repair/Replace item(s) checkbox.
- Enter the Repair Due Date.
- For each batch-controlled item, go to the red Batch Code (Ent) column on the far right of the grid:
- Press Enter.
- Double-click the batch code associated with the item being returned.
- Press Ctrl+S or use the Save button.
Assign the warehouse locations
- Right-click and select Assign Warehouse Locations.
- In the Select source locations for items dialog, select an item in the upper grid.
- In the lower grid, enter the quantity against the location the item is being taken from.
- Repeat this for each required stock item.
- Click OK.
- Use the Put Items Into the Returns Bin button on the Supplier Return to move the items into the Returns Bin.
Note: The available locations will reflect the item and batch code selected earlier.
Remember:
- Stock can be taken from multiple locations by splitting the quantity across them.
- The warehouse location quantities must match the total quantity on the return before the items can be added to the Returns Bin.
- Items in Quarantine must be moved to another location before they can be added to the Supplier Return.
- If some items are already in the Returns Bin, green-select only those that have not yet been added before using the Returns Bin option.
Step 2: Process the repair or replacement return
When the items are ready to be sent to the supplier:
- Find and open the relevant Supplier Return.
- Use the Create Full Credit Note button on the Supplier Return.
- Confirm the message and click OK.
- Click OK to close the dialog.
- A message confirms that a Purchase Order has been created and displays its Purchase Order number.
- Make a note of the Purchase Order number if required, then click OK.
As part of this process, Khaos Control removes the items from the Returns Bin and creates the associated purchasing records.
Step 3: Book repaired or replacement items back into stock
When the repaired or replacement items arrive from the supplier:
- Book the items into Khaos Control using the normal delivery process.
- Make sure you receive the items against the Purchase Order created from the original Supplier Return.
- When the Purchase Invoice is created, select the Post Invoice checkbox and post it.
- Once posted, the Purchase Invoice will appear on the [ Supplier | Statement ] screen.
Recommendation: On [ Supplier | Statement ], use the Purchase Credit Note created from the Supplier Return to pay for or offset the Purchase Invoice for the replacement items. This makes the payment allocations easier to track.